Ford 6.4L Oil Filter Location

Add Oil - Determine the correct oil type and add oil. 4L myself for the first time hopefully this evening. Leak Inspection - Start vehicle and visually inspect for leaks. 9 years, still working. Place a catch pan underneath the plug. Do not lay under it, as some water and fuel will come out. 3 micron bypass element.

  1. 6.4 powerstroke oil filter location maison
  2. Powerstroke 6.7 oil filter
  3. 6.4 powerstroke oil filter location 2018 chevy colorado 3 6
  4. Ford focus oil filter location
  5. 6.4 powerstroke oil filter location 2007 hyundai sonata

6.4 Powerstroke Oil Filter Location Maison

Reinstall and tighten engine oil drain plug. Remove Filter - Position drain pan and remove the oil filter. The truck could get hit by lightning too. Great idea to replace/service this oil filter when replacing your EGR cooler and/or your engine oil cooler. Unscrew the engine oil filter cap until the O rings seal has broken – This will let the oil filter housing fully drain before it is removed. Check engine oil level on the dip stick and add more if needed to reach the full mark. Drive the truck up on sturdy ramps, place Homer bucket under pan, open Fumoto valve. Powerstroke Oil Change Bundles –. Remove it and let oil drain. Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100, 000 videos showing drivers how to fix things on their cars. Oil filter location on 08 6. • ratchet- both jobs. Install the new filter, install the cap and torque to specs. Working under the hood, locate the large cap that houses the oil filter.

Powerstroke 6.7 Oil Filter

You never know what could be dripping down from the engine, battery acid, engine coolant, brake fluid, etc. Look at the engine bay as well to assure that the secondary filter housing is leak free too. It will also allow a 3/8" drive ratchet by itself, but I am not a fan of this practice, as it puts too much stress on the cap and can cause it to split. Tools Needed: - 19mm wrench or socket and ratchet. I also might add that on the 6. Go back and change the filter right before you fill it with the 6. 4 on frame is a little more difficult as well because of the wiring harness, so I use a wiggle tail on the end of the socket so I can get a better angle. The lever on the valve sits in a detent and is spring loaded. Ford focus oil filter location. Yup, it is that easy! Now, place a chock under the tire to asure that the vehicle will not roll. Anything else I should be on the lookout for?

6.4 Powerstroke Oil Filter Location 2018 Chevy Colorado 3 6

Throw in about 14 quarts, start, check for leaks, assuming there are none, shut it down and let it sit about 30 minutes. Place the catch pan under the water separator and using the 6mm allen head wrench, remove the OEM drain plug. Refill the lube system through housing on right valve cover area, about 14 quarts of CJ-4 rated diesel engine oil. Loosen the cap on the filter first, leave the filter in the housing with the cap on, then drain the oil from the pan. Shut down engine and wait for engine oil to settle. In the picture above, it is brass. When I change oil, I ensure the engine is up to operating temps, let it sit for 1/2 hour, loosen up the oil filter cap, go find a pan that can hold 15 quarts of oil, place it under the rear of the oil pan, loosen and remove the drain plug and stand by, oil will drain out with quite a rush. Climb under the vehicle and locate the oil drain plug located on the very bottom of the oil pan. When you loosen the oil filter's cap, you open a drain valve that drains the oil in the housing back to the oil pan. What size socket to change oil-filter on 6.4. The final thing you will need to do is to cycle the key on and off four or five times.

Ford Focus Oil Filter Location

Do not reuse the O-rings that are on the caps. Lol:Get a Fumoto valve. Once fully drained, reinstall the drain plug into the oil pan and torque to spec. Find Oil Drain - Locate the oil drain plug underneath the vehicle. What type of oil is required in a F-250 Super Duty? Remove and replace engine oil filter cap o ring. The one towards the passenger side holds the oil filter and the one towards the drivers side holds a fuel filter. 6.4 powerstroke oil filter location maison. You forgot place drain pan under oil filter is under the hood, you remove the lid and pull the filter out. Lightly lube the O-ring to prevent pinching, snap on new filter, careful not to crush it. 4 Powerstroke oil change to stay on top of your engines maintenance.

6.4 Powerstroke Oil Filter Location 2007 Hyundai Sonata

•Having 1/4 tank of fuel only will minimize fuel loss when draining the HFCM. It is the tall style cap favoring the passenger side. Be careful, as some more fuel and water will come out as you loosen the cap and remove it. Read Oil Level - Reinsert dipstick, remove and then read oil level. Oil filter change: Step 1. Powerstroke 6.7 oil filter. Remove Dipstick - Locate, remove and wipe oil dipstick. 7 Powerstroke Oil Change Bundle - Hot Shot's Secret - Green Diamond/Motorcraft Filter. See two black plastic caps with what looks like a bolt head on top of them. Received 0 Likes on 0 Posts.

Place the vehicle in park and lock the emergency brake down. Parker Hannifin Push Lock 300 PSI Hose. Re-install drain plug and fill with oil. Ford provided a nice little lever to make the job easy. Instructions for oil change. Yes, due to something that is going to hang lower off the bottom of the oil pan. Once drained, install the new brass plug and tighten snug, but do not over tighten. If your truck has the OEM drain plug that is flush mount, purchase part number #6E7Z-9C082-A for around $16. Locate the HFCM inside the driver side framerail. •Motorcraft fuel filter set (will include two filters). Remove the fuel filter from the engine housing and trash it.

Mon, 29 Jul 2024 02:13:02 +0000